電光性能

Sensor format 1

1024 pixels on 25μm pitch with 8 readout ADCs

Optical aperature (pixel height)

500μm or 25μm (square pixel sharply defined by mask on detector surface)

Peak quantum efficency

> 70%

Gain capacitor setting

Net full well capacity (Me-)2

0.1 pF

1 pF

10 pF

Typical

Specification

Typical

Specification

Typical

Specification

2.0

>1.4

8.7

>7.7

85

>70

Gain (e-/cnt)1 3

540

< 620

2200

< 2450

21400

< 24500

Temporal noise (rms counts)1 2

2.0

< 2.4

1.6

<1.8

1.3

<1.4

Dynamic range1 2 4

1900:1

> 1350:1

2600:1

> 2100:1

3100:1

> 2600:1

Differential non-linearity1 2

+/- 0.8%

< +/- 1.2%

+/- 0.8%

< +/- 1.2%

+/- 0.8%

< +/- 1.5%

Bad pixel specification

White, dark, noisy or pixels exceeding +/- 10 of the mean value when illuminated at 50% of full well

Number of bad pixels limited to a maximum of 1% of array total; no bad neighbors within 5 pixels

Exposure time1 3

0.007 ms to 1 ms in preset modes or to > 1 s with user programmed or via the width of the ext. trigger

Trigger modes 3

Free run, single line per trigger, variable exposure, or gated burst

Sync output

SMA connector: digital signal, high during integration

External trigger 3

Three modes via CC1 or SMA

External variable ET

User set by the duration of trigger input signal (minimum ET pulse: 10μs)

External trigger jitter

+/-1 clock cycle: nominally 80 ns with internal ET

Pixel rate

100 Mpix/s max with 2 x 12-bit words transferred on each Camera Link strobe clock at 50 MHz

Digital output format

12-bit base Camera Link?; recommend NI PCIe-1427 or equivalent frame grabber

Readout mode

Integrate while read, differential double sampling

Corrections (preset OPR)

Factory calibrated gain, offset, and bad pixel replace, applicable to the center 90% of the array

環(huán)境及電源要求

Operating temperature:

-10°C to +50°C case temperature

Storage temperature:

-20°C to 70°C

Humidity:

Non-condensing

Power requirements:

100-240 VAC, 47-63 Hz, < 1.0 A |7-16 V, < 6 W at 25°C, <9 W at 50°C |< 1.5 A peak

機械尺寸

Length x Width x Height:

6.1 cm x 7.37 cm x 7.62 cm

2.4 in x 2.9 in x 3.00 in

Length excludes I/O connectors, and lens adapter

Weight:

< 450 g or 1 lbs (no lens or adapter)

鏡頭座及適配器

M42x1-6H with 5.7 mm to image plane none, fixed distance C-Mount adapter or adjustable distance F-Mount adapter (see ordering info)

光譜儀安裝座:

4 tapped 8-32 holes in 2 inch square pattern

4 tapped M4x0.7-6H holes spaced 5 cm x 4 cm (h x w) O-Ring light seal, 1.9 inch diameter, 1/16th thickness

Camera Tripod mount:

2 tapped?-20 holes alternating on?”(19 .05 mm) spacing with 2 tapped M6-6H holes

Side wall mounts:

4 tapped M4x0.7-6H holes, 5 x 4.5 cm spacing (h x d)

訂購信息

Camera Model1

Part Number

Max. Line Rate1

Pitch

Pixels

FPA Length

Aperture (Height)

Classification

SU1024-LDH2-1.7RT-0500/LC

8000-0480

91,911 lps

25μm

1024

25.6 mm

500μm

EAR99

SU1024-LDH2-1.7RT-0025/LC

8000-0484

91,911 lps

25μm

1024

25.6 mm

25μm

6A003.b.4.a